Replace Engine Coolant in Honda Accord 2013 - 2017
Fly Bee Fly Bee
3.37K subscribers
50,143 views
0

 Published On Oct 16, 2019

Engine coolant replacement (radiator fluid replacement) in Honda Accord 2013 - 2017 and older models is a simple drain & fill that can be easily done in just a few minutes. The coolant changing interval varies by vehicle: 60K - 100K miles. I changed mine at 6 years 90K miles and just before summer.

At a Honda dealer the engine coolant replacement cost is $150 approx but at home the coolant change cost is about $30 or less because we only need the fluid.

PARTS & SUPPLIES:
* Honda Type 2 Coolant, 2 gallons
Part # OL999-9011, https://amzn.to/2XuGvEh

* Oil drain pan, https://amzn.to/33qaQYn

* Basic Funnel, https://amzn.to/2EY1Pfo
or use coolant funnel, https://amzn.to/3cThklq


 STEP-BY-STEP PROCESS:
1- Be sure that engine is cold (not hot), and car is off
2-Place drain pan under radiator drain valve (petcock)
3-Open radiator coolant drain valve but don't remove it
4-As coolant starts to drain, open radiator cap on top
5-Remove coolant reservoir from vehicle and empty it
6-When coolant is finished draining out, close drain valve
7-Tighten the drain valve (pet cock) - don't over-tighten it
8-Refill radiator with new fluid
9-Refill the coolant reservoir

BLEED AIR FROM THE SYSTEM / BURP THE SYSTEM
* Start the car and wait for the radiator fan to kick in
* Air bubbles will escape from radiator through open cap
* Press on radiator hose a few times to help air escape
* Let the radiator fan cycle on-off a few times
* Top off radiator with more coolant as needed
* Close the radiator cap and turn off the car

WHAT ABOUT COOLANT THAT REMAINED IN SYSTEM?
This model of accord uses 8 qt or 2 gallon of coolant. One drain & fill replaces a little over 1 gallon of coolant or 50%. A second drain & fill would provide 75% new coolant in system, and a third drain & fill will result in almost 90% new fluid. In total we would use about 3 gallons of new fluid or about $60 - or less if you buy this on sale.

Space out the changes over a few hundred miles to be sure the new-old coolant mixes. Other option is to do 'coolant flush' and replace all fluid in one-go BUT be warned that Honda advises to not flush the coolant. I would recommend drain & fill method.

If you like to have good coolant in car don't wait until 120K miles to do coolant drain & fill. Do it sooner. It cost under $20 to do one.


DISCLAIMER:
The description may contain affiliate links. As a member of Amazon Associates program I may earn commission from qualifying purchases made through these links at no extra cost to you. This video is not sponsored and I was not paid to make this video. All thoughts and opinions are my own.

This video is for educational purpose only and shows the work that I did. The information presented makes no claim, promise or guarantee to the accuracy or completeness of the content and there is no implied or expressed warranty or guarantee of any particular outcome. If you decide to follow something shown in this video, please do so at your own risk only. I assume no liability for any direct or indirect loss, property damage, or injury as a result of the information contained in this video. Thank you!

show more

Share/Embed