Spent a lot of time testing and optimizing this printer. See if this large budget printer is a good one - or if you can skip it. Find lot's of tips that will definitly ENHANCE your experience with this printer!
From the contents (use my chaptermarks!): Specs, Nozzle change, Bed levelling, do ANYTHING inside Linux? TIP remote monitoring and shutdown, Slicer SETTINGS, Print Examples, low temp - adhesion problems! TIP use the 0.8 nozzle, Bonus: UNBOXING

🌐▬▬▬▬LINKS▬▬▬▬▬▬▬▬▬▬▬▬▬▬🌐
11.4.24: they've reduced the price to 355€ (without 5KG PLA) → https://shrsl.com/4hjmm
or 399€ with 🔥5KG PLA Filament 🔥 🛒 https://shrsl.com/4hfgq (Affiliate)
(with VAT if you apply Code: FFSWX4PL2), free shipping from Germany

I deliver honest opinions, well researched and tested (sometimes "almost scientific" ;) reviews! If you can support this idea please check my PATREON: https://bit.ly/2ESMtIO

✅better Nozzle: https://cuts.top/DFTa (also find the 0.8mm there)
✅Yi Home camera IP Cam works https://cuts.top/DFSO
✅ my Orca-profile (Printer, Filament and process - using their ArtillerySlicer settings)
find them here: (incl. better print start procedure)
→ https://drive.google.com/drive/folder...

🔖▬▬▬Additional Infos:▬▬▬▬▬▬▬▬▬🔖
Large printer, claimed to be fast (klipper, linear rails,...)
relativly cheap option, quite easy to setup and operate

Hardware changed in details:
+ gantry mount easier, still very stable (with additional Z Rods)
Filament Spoolholder changed
+ linear rails on X and Y, Z like on the old one
+ printhead heatsink bigger, nozzle silicone better fit
* bigger, better Nozzle: https://cuts.top/DFTa (also find the 0.8mm there)
+ Bed heats fast now! 3-4 mins from 23C to 60C
+ FULL USB A port + USB c port! no more reset button
+ external Wifi antenna with SMA Plug!
- tray grip still miserable (but small detail)
- printbed doesnt snap in place as easy as on the old one (tip washers!)

- Software - takes longer now to boot up (klipper on mkspi instead of marlin)
+ Fluidd webgui - fully functional, no restrictions
- setup steps seem easy, onscreen instructions a bit confusing
- Zoffset first then manual levelling, then 11x11 auto bedmesh
+ SSH: user: mks pwd: makerbase 💡
- Logitech USB Cam: couldnt get it running in their linux...
+ but my Yi Home camera IP Cam works https://cuts.top/DFSO

Hardware seems to be good, but klipper config is sub optimal...
Auroratech: lower the stepperZ homing speed for better accuracy
[stepper_z]
homing_speed:5 ##(instead of 20!) 💡

🎥▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬🎥
my Hangar: http://goo.gl/QNzck
Filmed with: Sony A7c, Samsung Galaxy S10, edited with Premiere Pro

🙏▬▬SUBSCRIBE!!! → http://goo.gl/szFJv ▬▬ 🙏
(¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯)
►   / rcschim  
► https://rcschim.BLOGspot.com
► [email protected]
►   / rcschim  
►   / rcschim  
► Discord Server:   / discord  

🔖▬▬▬VIDEO INDEX▬▬▬▬▬▬▬▬▬▬▬🔖
00:00 Intro
01:05 Specs, overview
01:52 Nozzle change
02:37 Hardware
04:02 Bed levelling
05:23 Software needs improvement
06:50 do ANYTHING inside Linux?
07:28 TIP remote monitoring and shutdown
07:44 Slicer SETTINGS
08:16 Example - fast print
09:29 Low temp - adhesion problems!
11:02 TIP use the 0.8 nozzle
11:18 no Stringing no adhesion...
12:18 more testprints
13:00 Should you buy it?
14:30 Bonus: UNBOXING
15:08 Hardware changes X3 plus vs. X4 plus
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
#artillery #d3dprinter #rcschim