Buy the Honda fork seal replacement parts we used here: http://bit.ly/honda-goldwing-fork-sea...

Learn how to replace the fork seals on a Honda Goldwing. This is a 2007 Goldwing, and this job started as just a fork seal replacement. As we dug into the forks during disassembly, we found other parts that needed to be replaced.

We’ll start by removing the brake calipers, fender, and wheel. Then we’ll remove the various brackets from the fork. Next, we’ll show you how to remove the instrument cluster to access the top of the fork, which will allow you to remove the fork. Once removed, we’ll show you how to disassemble and evaluate the parts inside the fork and then get them replaced. Once we finish the rebuilding the fork on our Goldwing, we’ll show you how to get it filled with fluid and then get the right and left sides of the fork back on the motorcycle.

NOTE: The two sides of the fork have slightly different designs. To see individual fork rebuilds:
Left fork rebuild - 7:44
Right fork rebuild - 22:20

See the Honda Goldwing front fork seal diagram here: https://www.partzilla.com/catalog/hon...

You’re going to need a fork seal driver for this job. If you don’t have one, find it at Partzilla.com: https://www.partzilla.com/product/hon...

Read how to remove the forks and replace the left side seals here: https://www.partzilla.com/blog/honda/...

Read how to replace the right side seals and reinstall the forks here: https://www.partzilla.com/blog/honda/...

You’re already working on the front end, let’s change the brake pads on your Honda Goldwing:
   • Goldwing Front Brake Pad Replacement ...  

Then you can change the rear brake pads on your Goldwing:
   • Honda Goldwing Rear Brake Pad Change ...  

VIDEO HIGHLIGHTS:
Removing the fender - 2:40
Removing the brake calipers - 3:10
Removing the wheel - 3:50
Removing brake and fender mounts from fork - 4:30
Removing fork crossmember - 5:00
Removing center instrument panel - 5:30
Removing instrument display - 6:30
Removing fork caps - 7:10
Dropping fork legs - 7:30
Left Fork disassembly - 7:45
Fork assembly - 14:30
Replacing fork tube bushing - 15:00
Using fork seal driver - 17:00
Installing Rings and Seals - 18:00
Replacing oil stopper ring - 19:40
Installing dust seal - 20:00
Filling forks with suspension fluid - 20:30
Installing spring and closing fork - 21:30
Right fork disassembly - 22:21
Removing dust seal - 24:20
Rebuilding right side fork - 25:50
Installing new right fork seals 26:30
Refilling right fork - 28:30
Installing right fork spring - 29:40
Installing left fork - 30:30
Installing right fork - 31:20
Replacing instrument cluster and dashboard - 32:00
Replacing brackets on forks - 32:30
Replacing front wheel - 33:50
Aligning forks - 34:50
Mounting brake calipers - 36:20
Installing fender - 36:40
Replacing cross brace - 37:00

Buy OEM Honda Goldwing GL1800 parts here:
https://www.partzilla.com/catalog/hon...

Talk to us:
Twitter:   / partzilla  
Facebook:   / partzilla  
Instagram:   / partzilla  

In the video we’re working with a 2007 Honda Goldwing GL1800, but you may have similar steps for your Honda motorcycle. If you’re not sure whether these steps apply to your motorcycle, leave a comment and we’ll get back to you.

RELATED CONTENT:

Honda Goldwing oil change:
   • Oil Change on a Honda Goldwing GL1800...  

Honda Goldwing air filter replacement:
   • Goldwing Air Filter Replacement | Par...