GPS-to-CAN with 3D IMU | CANmod.gps
https://www.csselectronics.com/produc...


In this intro we introduce the CANmod.gps:

- 00:00 Introduction
- 00:20 Key features of the GPS-to-CAN sensor module
- 02:01 Output signals overview (position, speed, altitude, ...)
- 04:08 Examples of use cases
- 05:00 Illustration of 'sensor fusion' feature (Untethered Dead Reckoning)



The CANmod.gps is a 100% standalone GPS-to-CAN module with 3D inertial sensor (via a built-in gyroscope and accelerometer).

The module produces data such as GNSS position, speed, altitude, attitude, acceleration rates, angular rates, odometer and more - and outputs it via a CAN interface.


Key features include:

- PLUG & PLAY: Standalone - no PC required. Integrate with any CAN bus to add GNSS/IMU data

- COMPACT: 7x2x5 CM. 70G. Alu enclosure. 4 LEDs. 5-24 V DC via DB9. USB for config/firmware

- GLOBAL: 1 Hz GNSS position. Hot start via battery backup. GPS, Galileo, BeiDou, GLONASS

- 3D IMU: Built-in gyroscope (roll, pitch, yaw) and accelerometer (X, Y, Z). 100 Hz frequency

- SENSOR FUSION: High precision position and attitude via sensor fusion of GNSS/IMU

- CONFIGURABLE: Configure IDs, baud rate, frequency & more via JSON config editor

Get your CANmod.gps today!
https://www.csselectronics.com/produc...

Note: USB streaming is pending a firmware update (ETA: Q4 2021).
___________________________________________

If you're interested in learning more about logging CAN bus data, we recommend that you check out our below intros to our CANedge CAN bus data loggers, our CANmod sensor-to-CAN modules and our free software/API tools:

Learn about CAN bus data logging:
   • CANedge: CAN Bus Data Loggers - Intro...  

Learn about the CANedge and CANmod:
https://www.csselectronics.com/pages/...

1) CANedge1: https://www.csselectronics.com/produc...
2) CANedge2: https://www.csselectronics.com/produc...
3) CANedge3: https://www.csselectronics.com/produc...
4) CANmod.gps: https://www.csselectronics.com/produc...
5) CANmod.temp: https://www.csselectronics.com/produc...
6) CANmod.input: https://www.csselectronics.com/produc...

See also our intros to practical CAN bus data logging:

1) J1939 telematics: https://www.csselectronics.com/pages/...
2) OBD2 telematics: https://www.csselectronics.com/pages/...
3) Marine telematics: https://www.csselectronics.com/pages/...
4) Grafana telematics dashboards: https://www.csselectronics.com/pages/...
5) asammdf GUI: https://www.csselectronics.com/pages/...

For more tutorials, see our overview: https://www.csselectronics.com/pages/...

___________________________________________

At CSS Electronics we specialize in simple-to-use, pro specs and interoperable CAN bus data loggers - like the CANedge and CLX000 series. The devices let you record raw data from e.g. cars, trucks, industrial machinery and other CAN based applications onto an 8-32 GB SD card. The devices are interoperable, meaning you can process the data in your favorite existing software - or use our 100% free and open source software/API tools.

Website: https://www.csselectronics.com
Products: https://www.csselectronics.com/pages/...
Software: https://www.csselectronics.com/pages/...
Case studies: https://www.csselectronics.com/pages/...

We offer 100% free technical sparring - contact us:
https://www.csselectronics.com/pages/...