Buy Now!
New Wheel Bearing & Hub Kit from 1AAuto.com http://1aau.to/ia/1ASHF00486

This video shows you how to install a front wheel bearing & hub on your 2003-2007 Toyota Corolla. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obeb/1AXAA00013
• Pry Bar http://1aau.to/oP5/1AXAA00020
• 19mm Wrench http://1aau.to/oSo/1AXAA00010
• 17mm Socket http://1aau.to/objM/1AXAA00015
• 19mm Socket http://1aau.to/oabo/1AXAA00043
• 21mm Socket http://1aau.to/oabo/1AXAA00043
• 30mm 12-Point Socket http://1aau.to/oaa/1AAST00002
• Press
• Pliers
• Snap Ring Pliers
• 1/2 Inch Impact Gun http://1aau.to/oqV/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench http://1aau.to/oaxA/1AXAA00044
• Gloves http://1aau.to/oR5/1AXSS00048
• Safety Glasses http://1aau.to/oKp/1AXAA00343
• Floor Jack http://1aau.to/oXU/1AXAA00068
• Hammer http://1aau.to/oRj/1AXAA00091
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.