Published On Nov 10, 2022
Orientation Why it's important - Lychee Slicer | 3D Printing - Featuring Crippled God Foundry - The Rotting One Series Minis
Today we cover orientation and why it can have such a big effect on a print. The peel force or amount of peeling that has to occur can be greatly reduced and mitigate damage to the model as well by using a good angle for supporting. This can be for hollowed or non-hollow models.
http://printmymini.com/
/ @iprint3dminis
/ printmy3dmini
https://www.etsy.com/shop/PrintMyMini
Good luck, we look forward to the comments.
Check us out on Instagram too:
/ printmy3dmini
Just give us a follow on instagram, and be sure to share this with your friends!
My Lychee Slicer support settings for minis.
Super Light and Light supports
1.15 - 1.22 bar diameter
0.22 - 0.15 tip diameter
3.10 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .29, raft is .50
Mediums
1.33 - 1.44 bar diameter
0.33 - 0.44 tip diameter
3.00 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
I rarely use heavy supports, but these are my settings for HEAVY
Heavy
1.55 - 1.75 bar diameter
0.55 - 0.75 tip diameter
4.00 - 5.35 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
Happy printing!