First part of installing the Atoto 7" S8 Gen 2 into my Lamborghini Gallardo LP 560-4. Here I go over the wiring of the main unit including where to find the wires in the Gallardo specifically, and more generally how to replace an RNS-E radio from Audi with an aftermarket unit. This will be similar for all Audi Cars from the early 2000's to mid 2010's equipped with the RNS-E radio.

Parts
===============================
Atoto S8 Standard Gen 2
https://www.amazon.com/gp/product/B08...

Atoto 150 degree 720p Backup Camera
https://www.amazon.com/gp/product/B08...

Audi Removal Keys
https://www.amazon.com/gp/product/B01...

Audi/VW dual antenna adapter
https://www.amazon.com/gp/product/B07...

Audi harness for RNS-E
https://www.amazon.com/Aftermarket-Co...

Recommended Tools (NOT Affiliate links and NOT sponsored)
================================
Soldering Station: Hakko FX888-D (comes with flush cuts)
https://www.amazon.com/Bundle-Solderi...

Alternative Chinese Hakko 939D knock-off (similar to what I use)
https://www.amazon.com/Professional-D...

Flush cuts (if you don't get it with the bundle)
https://www.amazon.com/Hakko-CHP-170-...

Silver-bearing solder - 62/36/2 ~ 0.2"
https://www.amazon.com/Kester-83-7145...

Heat Shrink Kit
https://www.amazon.com/gp/product/B01...

0.1" Connector Kit
https://www.amazon.com/Dupont-Connect...

Automotive connector Kit (probably better than Tamiya for this)
https://www.amazon.com/OCR-Waterproof...

Torx socket adapter
https://www.amazon.com/LEXIVON-Socket...

Special Thanks
================================
Chad Edward for the pre-install footage I forgot to take. Check his instagram:   / chadedward23  

Espen Lund for giving the tip about the reverse 12v wire in the C-connector

Music
================================
Nobody Knows - So Far [Playing on the actual Head Unit]
Nobody Knows - Play it Again

(Nobody Knows was the band I was in back in college so the music is owned by Aaron Cumberledge and myself. (c) 2003, all rights reserved)