#Snapmaker #DIY #Enclosure #Arduino
The video shows the process of creating a DIY module compatible with Snapmaker 2.0. The module has full functionality of the emergency button & enclosure control (LED lighting and Fan control) and some additional functions. Source code for Arduino was developed based on the original open source provided on Github by Snapmaker.

If you want do this module yourself, below you will find all the necessary files:

Schematic diagram : https://drive.google.com/file/d/1i-Jc...
PCB Gerber files : https://drive.google.com/file/d/1JEde...
HEX file to upload Arduino : https://drive.google.com/file/d/1ypC7...
How to upload a hex file to Arduino ? See :    • How to Upload HEX file to Arduino. Th...  

Note: For testing only ! At your own risk and private ( not commercial) use.
***************************************************************************************************
Update 1
Because snapmaker has changed the way the M1010 Sx Px command is handled in the controller firmware,
it is no longer possible to use P values greater than 100 as shown in this video,
e.g. to create macros and control the buzzer, etc. :(

Update 2.
I have updated the HEX file - use a newer version if you cannot control the lighting after updating the Snapmaker controller firmware.