Thanks to PCBWay for sponsoring this video. Check out https://www.pcbway.com/ for custom printed circuit boards, electronics, and rapid prototyping services (Use my referral link to get $5 of New User Free Credit) https://www.pcbway.com/setinvite.aspx... !

The StarGazer is a really cool, high quality FPV drone and is great for beginners, but it is probably not for you if you want to progress quickly and deeply into the FPV hobby.

Hisingy Store: https://store.hisingy.com/
Hisingy website here: https://hisingy.com/en-us/index.html

From the manufacturer:
"Product Features

1. Literally Ready-to Fly

Absolutely no assembly required, no soldering required & no software configuration required. Everything’s ready to go right out of the box.

2. Stupidly easy to fly

Superb altitude assistance combined with inertial navigation positional assist, can almost hover still with minimal drift. Default handling is tuned extremely tame for complete beginners.

3. Extreme Robustness

2-meter (or 6 feet) crash test on concrete surface 50 times still flyable with no major structural failures; 5-meter (or 15 feet) crash test on concrete surface 20 times with no electronic hardware failures.

4. Safety is the key

Crash protection function disarms the Mini Drone once crash is detected. Motor emergency stop function cuts off power to the motor once blockage is detected. Fully-enclosed flight battery combined with a protection circuit to eliminate any risk of over-charging, over-discharging and over-current.

5. Simple maintenance & DIY

Modular design with snap-on canopy enable beginner pilots to maintain their drones at ease. Various tested and verified DIY Parts from HISINGY available for pilots to upgrade their drones and beef up their appearance/performance.

6. Configured via smartphone APP

Connect to HISINGY APP via bluetooth for handling tuning (max angle, max yaw rate, vertical speed and more) and various configurations (bluetooth name change, LED color settings, level calibration, trim and more) . Fly more to accumulate flight time and unlock performance points to gain more performance. OTA firmware update is also available once new firmware is out."

Full disclosure: Hisingy sent me this kit free of charge for this review. The views and opinions expressed in this video are my own and Hisingy did not see this review until I published it.

-------------
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/

Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON:   / rcwithadam  
Thanks!

-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #fpvdrone #DJI