You have lots of options when tackling rust - Dave is walking through the differences between Fast Etch, Rust Converter, and Gel Rust Dissolver.

Fast Etch: https://www.eastwood.com/rust-remover...

Gel Dissolver: https://www.eastwood.com/rust-remover...

Rust Converter: https://www.eastwood.com/eastwood-rus...

00:00 Introduction
01:52 Fast Etch
05:25 Rust Converter
08:13 Rust Dissolver
11:43 Where to Apply

Eastwood Fast Etch
This specially formulated rust remover is a powerful, rust-fighting liquid created to meet the needs of auto restorers.

✅ Ideal Prep for Painting and Powder Coating
✅ Leaves Zinc Phosphate Coating
✅ Promotes Adhesion and Prevents Rust
✅ It reaches even inaccessible areas, quickly dissolving iron oxide completely and leaving a zinc phosphate coating.
✅ Fast Etch can be sprayed, brushed, or used as a parts dip.
✅ It is non-toxic, non-flammable and reusable.
Treated surfaces should be wiped with PRE Painting Prep (10041 Z) or thinner before priming and painting. Only the quart size comes with a sprayer.

Gel Rust Dissolver
Even the oldest, rustiest metal parts can be restored by using our automotive rust removal solution. Eastwood Rust Dissolver removes only the rust and won't eat away at the metal itself. This leaves the newly de-rusted metal ready to paint, plate or powder-coat. Our rust remover outperforms many comparable products such as Rust-oleum while costing less, letting you renew body panels, engine blocks, springs, tubes and much more.

Liquid Rust Dissolver works as long as the surface is wet. Simply submerge the part let it sit for at least eight hours. Items that cannot be fully immersed due to size can be placed in the discharge stream of a commonly available small pump. Another option is to apply our Rust Remover Gel to the surface, then loosely cover the part in plastic or saran wrap for protection. One gallon of liquid or gel de-rusts about 20 square feet of metal. Once you’re finished with the rust dissolver, wipe the surface down with Eastwood PRE Painting Prep to remove any remaining loose rust. Learn more about our rust removal solutions at the Eastwood Garage.

Eastwood Rust Dissolver Features:

✅ Gentle enough for engine parts
✅ Reusable
✅ Removes about 5 sq. ft. of rust per quart


Rust Converter
Instead of throwing out rusted automotive parts that you know will be hard to replace, use Eastwood Rust Converter to restore their performance. This acidic paint is formulated for panels and parts that have heavier rust but still are structurally intact. By spraying or brushing Rust Converter on the surface, you trigger a chemical reaction that turn residual rust into more stable iron oxide. It also forms a paintable black protective coating that is compatible with most topcoats. Last but not least, Rust Converter seals the metal to help prevent future corrosion.

Use rust converting treatment as part of a complete restoration process that gets your barn find back on the road. Our formula penetrates the metal quickly and doesn’t require any sanding. Since the paint is water-based, it’s much safer than traditional solvents. The Eastwood Garage has much more information about Rust Converter, including when to use it versus other anti-rust solutions (such as Rust Encapsulator ). Extend the life of your vehicle by doing the job right with a 100% customer satisfaction guarantee.

✅ Rust Converter stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding. Just apply to transform the rust
✅ Penetrates faster than other brands
✅ No sanding needed - just apply to transform rust
✅ Coverage: 50 square feet per quart
✅ No mixing needed
✅ 90 Day Warrant

For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook -   / eastwoodcompany  
Instagram -   / eastwoodco  

Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle - from welders to paint and everything in between.