How to use a Brake Bleed & Fluid Extractor
YouTube Viewers YouTube Viewers
70.5K subscribers
180,913 views
0

 Published On Feb 21, 2019

Available in Australia: https://bit.ly/2XiCp0c NZ: https://bit.ly/2twfZee

Do you find brake bleeding a tedious task? The Toledo Brake Bleeder and Fluid extractor makes it a pain-free, one person job.
The Toledo design relies on compressed air to make fluid extraction easy - and super quick. With a 1.6 litre per minute extraction rate, and a 1L fluid reservoir - the job will be done before you know it.

In the kit is a flexible, and a firm suction hose. A rubber hose adaptor, bleed nipple adaptor; and two hanging hooks. Connection to an air compressor is achieved by means of a quarter inch thread in the bottom of the gun. Just install your choice of air fitting, set the compressor anywhere between 90 and 170 PSI - and you’re ready to go.

If you are replacing the fluid entirely, you might like to begin by sucking the old fluid from the reservoir. Remove the bleed nipple adaptor for this, and use the suction hose to quickly draw the old fluid out. Replace it with some new fluid; and leave the cap off for now.

Always begin bleeding brakes at the wheel furthest from the master cylinder. Using the rubber bleed nipple adaptor; connect the brake bleeder to the bleed nipple. Now loosen the bleed nipple a few turns; and squeeze the trigger on your Toledo Brake Bleeder.
Watch the fluid that flows down the tube; and pause occasionally to check and top up the reservoir if necessary. Should the fluid drop too low; air will enter the system – and you’ll need to start again. Once you’re confident you have pulled the new fluid through; you can tighten off the bleed nipple, remove the brake bleeder, and proceed to the next wheel.

Repeat this process for each corner of the vehicle, and be sure to keep that fluid level topped up as you go. Once the final brake caliper has been bled; top up the reservoir one final time – and replace the cap. Oh, and always test the brakes with the vehicle running, and stationery – to ensure everything is safe.

Whether you’re bleeding brakes every other day at work, or just want to make life easier in the home workshop – the Toledo Brake Bleeder and Fluid Extractor makes it easy.

---------
Supercheap Auto Website: http://bit.ly/1FpfKkw NZ: http://bit.ly/2rK6Lg5
YouTube Channel: http://bit.ly/2sjZ92q
Like us on Facebook: http://bit.ly/1Ry7HuN
Supercheap Auto Blog: http://bit.ly/2skbVOE
---------

Watch our latest and greatest television ads, Check out our how to videos, product videos or learn how to check it!

show more

Share/Embed