Buy Now!
New Axle Shaft from 1AAuto.com http://1aau.to/ic/1AAXS00028

This video shows you how to install a new rear axle, bearing, & seal kit from TRQ on your 1999-2006 Chevrolet Silverado 1500.

Estimated installation time for a professional technician is approximately: 4 hours 12 minutes

This repair was done on a 2004 Chevrolet Silverado 1500 Base 4.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obIp/1AXAA00013
• Pry Bar http://1aau.to/oaap/1AXAA00020
• 10mm Wrench http://1aau.to/oaew/1AXAA00010
• 8mm Wrench http://1aau.to/okf/1AXAA00011
• 13mm Socket http://1aau.to/ocbi/1AXAA00015
• 18mm Socket
• 22mm Socket http://1aau.to/otS/1AXAA00266
• Bearing Race and Seal Driver http://1aau.to/oV/1AXAA00038
• Brake Caliper Compressor Tool. Single Piston. Lever Style. http://1aau.to/obq/1AXAA00288
• Slide Hammer
• Pliers
• 5/16 Inch Socket
• 3/8 Inch Drive Ratchet http://1aau.to/ocbi/1AXAA00015
• Ratchet http://1aau.to/occp/1AXAA00016
• Socket Extensions http://1aau.to/ocbi/1AXAA00015
• Torque Wrench http://1aau.to/obeF/1AXAA00044
• Brake Fluid
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oQr/1AXSS00035
• Copper Anti-Seize
• Fluid Transfer Pump
• Gasket Adhesive
• Gear Oil
• Gloves http://1aau.to/obbS/1AXSS00048
• Liquid Thread Locker
• Paper Towels http://1aau.to/oQr/1AXSS00035
• Safety Glasses
• Silicone Paste
• Bucket
• Floor Jack http://1aau.to/oazZ/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oamN/1AXAA00065
• Magnet - Extendable
• Pick http://1aau.to/o4J/1AXAA00037
• Punch
• Razor Blade / Gasket Scraper
• Rubber Mallet
• Wheel Chocks
• Wire Brush http://1aau.to/oyE/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.