Part 2 ▶︎    • How to Install Stainless Steel Brake ...  

Products in Video 🔨

Dremel 4000 Rotary Tool Kit ▶︎ http://amzn.to/2drXfXr
Brass Wire Wheel ▶︎ http://amzn.to/2dpvBr3
Rustoleum High Heat Primer ▶︎ http://amzn.to/2dpxfsL
VHT Caliper Paint ▶︎ http://amzn.to/2dpw6kW

In this video, I show you how I paint my 4 piston brake calipers that are going on my Accord. This process isn’t difficult, it is just a bit time consuming as you’re painting, and waiting, painting and waiting.

I used a dremel, a wire wheel, and 180 grit sandpaper to get the caliper clean. I then used a high heat primer, followed up by my base coat. I let that dry, and then put on some brembo stickers that I picked up from eBay, and sealed it up with a high heat clear coat.

If you have any questions regarding the video, you know where to throw them!! Thanks for watching :)
______________________________________________________________

Please give it a like 👍 and follow 👣
milanmastracci YouTube Channel ▶︎    / milanmastracci  
milanmastracci Facebook Page ▶︎   / milanmastracci  
milmast Instagram ▶︎   / milmast  

______________________________________________________________

Videos in the Outro 🎥
How to Build a Big Brake Kit on the Cheap ▶︎    • How to Build a 4 Piston BBK on the Ch...  
How to Remove Rail Dust ▶︎    • How to Remove Rail Dust / Tiny Rust S...  

______________________________________________________________

Video Chapters
Introduction: (0:00)
Overview: (0:32)
Disassembly: (1:08)
Prep & Cleaning: (2:57)
Painting Process Explained: (4:15)
Primer: (5:19)
Base Coat: (7:23)
Decal Application: (9:01)
Clear Coat: (12:15)
Final Thoughts: (13:00)