After approx 650 miles of riding back and forth to school these pads have worn down to nothing.
I found replacements for 12$ on the interwebs and got to it. First time changing bike brakes. Easy enough. Anyone can do it. I generated a step-by-step guide for you to change your electric bike's brake disc pad:

Tools needed:

· New brake disc pads
· Torx wrench or Allen wrench (depending on your bike's brake system)
· Needle-nose pliers (optional)

Steps:

1. Release the tension: Open the brake caliper by loosening the caliper bolts. This will allow you to access the brake pads.
2. Remove the old pads: Pull out the old brake pads from the caliper. You may need to use needle-nose pliers to grip the pads.
3. Install the new pads: Insert the new brake pads into the caliper, making sure they're properly seated and aligned.
4. Close the caliper: Tighten the caliper bolts to secure the new pads in place.
5. Adjust the brakes: Squeeze the brake lever to test the brakes and adjust the cable tension as needed.
6. Repeat for the other brake: If your bike has a second brake, repeat the process for the other brake pad.

Remember to always refer to your bike's manual for specific instructions, as the process may vary slightly depending on your bike's model and brake system.

#getoutthereanddoit #diy #schwinn #ebike #california #sacramento #badreligion #chon