ABR Electric testing an applinace cord. https://abrelectric.com/ You'll need to test each wire in the cord. Put one probe on one of the plug's prongs and the other probe on the end of the same wire on the other side of the cord. What does the multimeter say? If it shows a low number, that wire is fine – electricity can pass through it. If it doesn't move or says 'OL' (which means Open Loop), then we've got a problem – no electricity is getting through.

Next up, let's make sure there's no short circuit. That's when electricity takes a shortcut and can cause big problems. Touch the probes to different wires in the cord. If the multimeter stays quiet (shows high resistance or 'OL'), you're good. But if it shows a low number, uh-oh, there's a short circuit somewhere.

If your cord has three wires, one of them might be a ground wire. It's always good to check that too. The process is the same – just make sure it shows continuity (low resistance) when you test it.

And that's pretty much it! You've just tested your appliance cord like a pro. If everything checks out, the cord is probably fine. If not, it might be time for a new cord or some further troubleshooting. Remember, always prioritize safety and if you're ever unsure, don't hesitate to ask for help or call a professional. Happy testing!