How to install K&N Airfilter | CBR 600 F4
Vibhushan Raju Vibhushan Raju
705 subscribers
6,923 views
0

 Published On Nov 17, 2021

Installing K&N AirFilter on CBR 600 F4
Model HA-6099
Fits 1999-2000 Honda CBR 600 F4


Pros-

1. Lasting power: K&N air filters are long-lasting and a better investment you can make for your vehicle. They can last up to the last life of the vehicle.

2. Increase performance: Properly maintained k& n air filter leads to increase in performance and mpg.

3. Re-usable filter: You don’t need to buy other filters, you just have to clean and re-oil and your engine will be in good condition. It saves you the need to buy a new filter every time you want to change the air filter.

4. Better filtration/air flow: K& N air filter provides better filtration and airflow with a cotton gauze/oil. Cleaning and re-oiling at the appropriate intervals will not only boost performance but also allow the engine to have better filtration.

5. Fuel economy: Improving the airflow results in improved fuel economy. More airflow into the engine will reduce fuel usage thus saving you a couple of dollars in fuel.

6. Power hungry: It boosts the vehicle horsepower by 1-4%. The filters increase the overall horsepower and torque although sometimes it may not be easy to notice due to the smaller percentage.

7. Washable: K&N is easy to maintain. With filter oil kit and cleaning products, you can easily clean and replace the oil making it more cost-effective.

8. Boost engine life: The air filters have large holes or spaces between filter fibers allowing more air to pass through and cool the engine prolonging the engine life.

9. Innovative design: It has a layered design with oiled cotton media to provide you with more airflow than traditional paper filters.

10. Easy installation: The air filter is designed to easily fit into the factory air box making it easy to install with the right tools.


 

CONS-

1. Engine contamination: If a low-quality K&N air filter is used, it causes more contamination or makes the engine exposed to more debris.

2. Cost: The initial cost of the filter is several times higher than the cost of the stock element. The paper filter may be cost-effective but you end up spending more on the replacements adding to the cost.

3. Frequent maintenance: You have to clean and re-oil the filters after certain intervals. The K&N filter website recommends after 50 000 miles which may likely be too long.

4. Dirt/dust: The filters have some spaces which introduce some dirt into the engine. More dust files up on the engine oil may cause wear on the moving engine parts.

5. Oiling problem: Oil filtering element cause more problems to a vehicle with mass air flow sensors. Over-oiling the element may cause the excess oil to move into the intake system and coat the sensors. The oil build-up may cause fouling or problems on the sensors.

6. Noise: K&N air filters make whining noises as the air is sucked in through the breathable filter holes. This air filter breath 10000s than any other standard air filter thus the noise.

7. Water problems: When inroads with high water, the water can be soaked into the filters. Water is then induced into the engine via the air filter holes especially in cases of cold air intake and this causes the engine to shut down or rust.

#cbr600f #cbr600f4 #k&nairfilter #cbr600

show more

Share/Embed