Custom Knife Making: The "No Belt Grinder" Drop Point Knife. Knife making with common tools.

Thank you for joining me on my channel. Today, we will be making a Drop Point Hunting knife, using only commonly available tools that you will find at any local hardware store. No belt grinder was used for this build. I made this knife using 3,2mm 1070 steel for the blade, 3,2mm steel pins, 6mm Carbon Fiber tube for the Lanyard hole and Rhodesian Teak for the scales. Feel free to use whatever you have available or prefer. Don’t forget to like and subscribe.

Download the template from below link:
https://drive.google.com/file/d/1MhA_...

01:00 Cutting the Profile
01:30 Hand filing the profile
02:30 Mark and drill the pinning holes
04:20 Mark the plunge lines and bevel areas
07:00 File the plunge lines and bevel areas
12:50 File the sharpening choil
13:40 Prepare the steel pins
16:13 Prepare the wood scales
18:23 Rough shape the scales
23:29 Heat treat the blade
26:30 Remove the warp from the blade
28:50 Hand sand the blade
33:12 Prep the scales for glue-up
34:49 Glue and assemble the knife
37:38 Clean up the pins
38:18 Peen the pins
39:00 Shape the scales
34:20 Sharpen the blade

DISCLAIMER:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Zeeman Knives will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including losses, damages, or injuries sustained while you were trying to emulate the actions and projects on this channel).
Always wear the appropriate safety clothing.