This is a climbing/bouldering wall that I built over the summer when many climbing centres were closed during lockdown :( It's perhaps a bit more complicated than necessary for a home climbing wall, but I had plenty of time on my hands sooooo

CONSTRUCTION:
The frame was welded together from 1 inch square steel box section (about 100m was used). This was then covered with ~18 square meters of 18mm thick plywood. I used 12mm thick plywood for the roof supported by 100 x 47mm wooden beams. The roof was covered with 2 layers of felt to make it waterproof (I also added a gutter on the back). The whole wall was painted with several layers of weather proof paint to ensure it lasts a long time in the ~changeable~ British weather.

LINKS TO MATERIALS:
Steel: https://www.metals4u.co.uk/materials/...
Plywood: https://www.clarkesofwalsham.co.uk/18...
T Nuts: https://www.fastco.co.uk/m10-zinc-pla...
Wood to Metal Screws: https://www.fastco.co.uk/catalog/prod...
Climbing Holds: https://www.holdz.co.uk/

MUSIC:
"Rising Tide" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/b...

"Almost Bliss" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/b...

"Guts and Bourbon" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/b...