Buy Now!
New Tie Rod from 1AAuto.com http://1aau.to/ib/1ASTE00771

This video shows you how to install new TRQ outer tie rods on your 2007-2017 Jeep Wrangler. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

This repair was done on a 2014 Jeep Wrangler Sport 3.6L Sport Utility 2-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler

Tools you will need:
• 18mm Wrench
• 18mm Socket
• 19mm Socket
• 21mm Socket
• Pickle Fork
• Trim Tool Set http://1aau.to/oayp/1AXXX00006
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet http://1aau.to/obIq/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/ob9g/1AXAA00015
• Torque Wrench http://1aau.to/obcL/1AXAA00044
• Gloves http://1aau.to/oa8z/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oays/1AXAA00068
• Jack Stands http://1aau.to/oakj/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.