Lets install the Armytrix downpipes on my Nissan GT-R!!
In todays video we install the Armytrix Downpipes on my 2014 Nissan GT-R! This is a challenging installation because the downpipes are so far up. The bolts to the turbos are not easy to get to. 5 bolts are on each downpipes, and you can only see 3 on each side. Using a combination of extensions, 360 swivel socks and a long breaker bar, we managed to get to alll of the bolts.

I sprayed PB Blaster penetrant oil on all the bolts before we started and I had no issues. The bolts are tight and you need to make sure the socket is on it square, but with leverage, I did not snap any studs.

It takes a bit to remove the 02 sensors on the stock GT-R downpipes, but using a channel lock wrench I could peel back the heat shield and get to the hex portion. I also sprayed the PB Blaster on these.

Overall we got the bolts and sensors out safely! If you snap studs on the turbos the engine needs to be removed to fix! That would suck!

Much easier to install the downpipes on my GT-R because they are much smaller than the stock cats.

Upcoming video we'll get the injectors installed and then see how my stage 3 straight pipe Nissan GT-R sounds!!

Music By:

Ukiyo
- Sleep In
- Let Me Down
  / ukiyoau  

Push N' Glide
- Compton Daydream
www.epidemicmusic.com

#gtrdownpipeinstall #nissangtrdownpipeinstall #straightpipegtr