PREPARATION: Careful preparation is important for maximizing the life and durability of your EZ Flares. Clean application area using isopropyl alcohol (test a small unobtrusive area for color-fastness). Application area must be completely dry before installing your EZ Flares

FOR MAXIMUM LIFE: For long lasting strength and durability, apply when temperature is at least 72º F (21º C). In colder climates, apply heat to the tape using a hair dryer or heat gun to help strengthen the bond.

STEP 1 (PEEL): Peel protective film from tape starting at one end of the EZ Flares and attach to the surface of the vehicle.

STEP 2 (PRESS): Continue installing to the rest of your vehicle while making sure to firmly press and hold the EZ Flares for several seconds against the surface of your vehicle. Make sure to eliminate air bubbles and gaps.

STEP 3 (CUT): Cut excess off with sharp scissors.

CLEANING: Clean the EZ Flares the same way you would clean your car. Using soap and water will help eliminate dust and grime build-up. Do not wash vehicle for 24 hours after installing to give the tape time to cure.

SHINING: You can easily give your EZ Flares a nice glossy shine or help eliminate scuffs by applying tire-shine or Armor All to the surface.