Who knew that 3D printed parts could be made to such tight tolerances! I'm very new to experimenting with ABS acetone smoothing, so this was a great project to start with! STL files are available to my Patreon supporters:   / tomstanton  

3D Printer settings:
Nozzle diameter - 0.2mm
Filament diameter - 1.75mm
Extrusion width - 0.25mm
Layer height - 0.1mm
Top solid layers - 6
Bottom solid layers - 6
Side walls - 6
Outline direction - Outside-In
Infill - 25% (honeycomb)
Material - ABS
Nozzle temperature - 240C
Bed temperature - 60C
Cooling - OFF
Printing speed - 1800mm/minute (Correction from video)

Other parts required:
1pcs Spring (outside dia: 3.18mm, free length: 12.7mm, wire dia: 0.51mm)
1pcs M4x30mm bolt (this can be any desired length)
3pcs M2x20mm bolts
1pc M2x bolt
2pcs 604-ZZ bearings
2pcs 3mm brass collars (these can be cut from brass tubing with inside diameter of 2mm and outside diameter of 3mm)
8mm inside diameter PVC tubing (for air supply)

A propeller of some sort will also be required, probably something around 5-8 inches in diameter will do the job.


Disclaimer: If you wish you 3D print this engine, do so at your own risk. Working with high pressure air is DANGEROUS and I hold no responsibility for your actions. All parts were printed to the highest strength possible and I can't guarantee that your parts will be the same. So please test the engine behind a protective cover and only to low pressures below 30psi.

Sponsored by 3D Printz UK: https://3dprintz.co.uk/

----------------------------------------------------------------------------------------------------------------------------------------
Support my videos via Patreon:   / tomstanton  

Huge thanks to the following Patrons for supporting me:
Anthony Losego
Justin Carroll
Anders Wangensteen
Ted Blue Courage
greg cordray
Peter Sripol
Mark Muir
craig rasch
Dave Joubert
Bernard Gauweiler
Zoltán Vér
Alex Birkett
Johan
Lars Nielsen
Charlie Barker
Teodor Macarie
Christian Meinhardt
markus
Landon Lively
Michel Otremba
Lenny Rosseel
luke dunbar
Taylor Roysdon
Layton Nelson
Wanja Döring
Michael Young
Tommy Karlsson
Charlie Bruce
Tristan Babcock
Claudio Mastìo
David Foster
Aitor Terán
Thimios Bilalis
Michael
Michael davis
Jiang Aihe
God-Emperor Jackson
Charlie TheHarle
rudolf tanguy
Per Sankanyeah
Alex
Tiago Monteiro
John William Cole
Connor Weller
Daniel Sköldengen
Floydd Gartman
Mads Rudolph
David Müller
Zachary Hudnall
Richard Walker
Nathan Frost
Ben Cook
Samuel Dudley
Javier B
Andoni
Faris Elmasu
Alper Bahçeliler
Martin aus Tirol
Riley Penegor
Ashleigh Peacock
Charlie Garcia
Marc Urben
Jon Xuereb
stuart sharp
Michael VENNARD
Adolph Janssen
Sebastian Orskaug
KRCNZ

Stanton Frames: https://www.stantonframes.co.uk

3D Printer filament sponsored by 3D Printz UK: https://3dprintz.co.uk/

My Other Equipment:
Main camera - http://amzn.to/2vlvlC6
Main lens - http://amzn.to/2gMrhru
Main tripod - http://amzn.to/2tqRjBt
Secondary Tripod - http://amzn.to/2t1NkMh
Microphone - http://amzn.to/2uuv9n0
Audio recorder - http://amzn.to/2v3mjcG

Banggood affiliate: https://www.banggood.com/?p=LT0710618...


----------------------------------------------------------------------------------------------------------------------------------------

Other Social Media Links:

Instagram:   / stantonfpv  

FaceBook: https://www.facebook.com/Tom-Stanton-...

----------------------------------------------------------------------------------------------------------------------------------------