►Full Project Guide: https://www.easycomposites.co.uk/lear...
Further information and links ▼

Second video in a four-part series following a project to make lightweight, super tough sledges for a polar world-record attempt. Introduction to the project here:    • The Dark Ice Project Introduction - C...  

In this tutorial we demonstrate the correct method for laminating larger composite moulds using our Uni-Mould rapid tooling system. The method shown allows a single laminator to lay-up a mould of almost any size. The tutorial covers suitable pattern materials and coatings, release agent application, gelcoat application, coupling/tie-coat application and the main layup.

Products featured in this tutorial:

►Complete Uni-Mould Kits https://www.easycomposites.co.uk/uni-...
►Uni-Mould Tooling Resin https://www.easycomposites.co.uk/uni-...
►Uni-Mould Tooling Gelcoat https://www.easycomposites.co.uk/uni-...
►Uni-Mould Coupling Coat https://www.easycomposites.co.uk/uni-...
►Emulsion Bound CSM https://www.easycomposites.co.uk/450g...
►Easy-Lease Release Agent https://www.easycomposites.co.uk/easy...
►Lint Free Wipes https://www.easycomposites.co.uk/lint...
►Filleting and Filling Wax https://www.easycomposites.co.uk/soft...
►Filleting Tools https://www.easycomposites.co.uk/Ball...
►Laminating Brushes https://www.easycomposites.co.uk/comp...
►Plastic Finned Roller https://www.easycomposites.co.uk/plas...
►Plastic Demoulding Wedge https://www.easycomposites.co.uk/plas...
►Blue Polishing Pad https://www.easycomposites.co.uk/medi...
►NW1 Cutting Compound https://www.easycomposites.co.uk/nw1-...