As the first overfender is now finished i thought I'd throw together a quick time lapse of the whole process for fun.
Enjoy!

T-shirts and stickers here!
http://buildcreate.bigcartel.com/



Follow me on Instagram @chris.purr
Contact me here [email protected]
Music   / kochetkovv  


Materials used.

Aluminium foil tape
Hot glue gun
Polyurethane foam board 12mm
225 gsm fibreglass matting (5 layers)
Fibral fibreglass filler
Dolphin glaze (for pin holes)
Raptor bed liner (mixed 3-1 with 20% thinners through a 2mm tip gun at 30psi)


Foam UK
https://www.ecfibreglasssupplies.co.u...


Foam US
https://store.acpsales.com/products/7...


This can probably be found cheaper in the US, this was the first site i found.