Published On Jun 23, 2020
Gearbest sent me their Fulcrum Minibot 3D Printer for testing. The Minibot is a tiny and adorable Core XY (after some research this seems to be a Hbot Setup, not Core XY?) 3D Printer that only measures 210x210x220mmwith a 75x70x70mm build area. I decided to put the machine to the test by designing and printing a toy with mechanical parts. Lets see how well it did the printing job. The Pull Copter is assembled using M2x8 Hex Cap screws
Affiliate links:
MINI ES121 Electric Screwdriver:
https://www.banggood.com/Upgraded-MIN...
My initial impression of this 3D Printer:
Pros:
Adorable machine with a small footprint. Can print very nice but require additional cooling for best results. Affordable. Solid built frame
Cons:
Did arrive with a shaft knocked loose which had to be reattached, I suspect this is due to a design flaw. The parts cooling is not optimal. Tiny build surface. Not very silent when printing. Spoolholder does not fit regular sized spools
The filament used in this project was provided to me by Fillamentum:
https://fillamentum.com/
Subscribe or follow me on
Instagram:
/ agepbiz
Twitter:
/ agepbiz
Music:
Soul Searching by Causmic
/ l33tpwned
3d printable files:
Cults:
https://cults3d.com/en/3d-model/gadge...
PrusaPrinters:
https://www.prusaprinters.org/prints/...
Thingiverse:
https://www.thingiverse.com/thing:450...
MyMiniFactory:
https://www.myminifactory.com/object/...