00:00 Intro
01:07 Step 1 - Base sketch
04:32 Step 2 - Centerline sketch
08:33 Step 3 - Draw headtube
12:19 Step 4 - BB ST
14:47 Step 5 - Front triangle
18:49 Step 6 - CS centerlines
22:14 Step 7 - Tire clearance body
23:45 Step 8 - SS centerlines
27:46 Step 9 - CS body
29:36 Step 10 - SS body
31:20 Step 11 - Joining the dropouts and yoke
34:59 Step 12 - Conclusions

In this tutorial, we will design a mountain bike frame from scratch. The method I show is a simplified version of the way that I design bikes in fusion360. Just with any software, there is going to be a learning curve.

See the thread for additional instructions, files, and to ask questions:
https://forum.customframeforum.com/t/...

Tips:
- Break down the video into steps. You may need to repeat steps at 1/2 speed to understand
- Try not to deviate from the tutorial on the first pass. You can always go back and change the geometry and design later
- If you are stuck, try reverse-engineering the CAD
- Just with anything, you only get better with practice