In this step 12 of how to build a Voron 2.4r2, we install wires through the cable chain/chainlink.

Don't have the time to watch the whole video? See the written tutorial here instead:
https://3dprinterschool.com/voron-2-4...

See All the Steps for How to Build a Voron 2.4R2 CoreXY 3D Printer:
- Step 1 Square Frame Assembly -    • How to Build a Voron 2.4R2! - Step 1 ...  
- Step 2 Bed Frame & Bottom Panel Assembly! -    • How to Build a Voron 2.4R2! - Step 2 ...  
- Step 3 Installing Linear Rails -    • How to Build a Voron 2.4R2! - Step 3 ...  
- Step 4 Installing the Heat Bed -    • How to Build a Voron 2.4R2! - Step 4 ...  
- Step 5 Installing the Z Drives and Z Idlers! -    • How to Build a Voron 2.4R2! - Step 5 ...  
- Step 6 AB Drives and Idlers Assembly! -    • How to Build a Voron 2.4R2! - Step 6 ...  
- Step 7 Flying Gantry Assembly! -    • How to Build a Voron 2.4R2! - Step 7 ...  
- Step 8 Z Joints & Gantry Install -    • How to Build a Voron 2.4R2! - Step 8 ...  
- Step 9 AB Belt Installation! -    • How to Build a Voron 2.4R2! - Step 9 ...  
- Step 10 Afterburner Extruder/Hotend Installation -    • How to Build a Voron 2.4R2! - Step 10...  
- Step 11 How to Install Cable Chain/Chain Links! -    • How to Build a Voron 2.4R2! – Step 11...  
- Step 12 Installing Wires thru Cable Chain! -    • How to Build a Voron 2.4R2! – Step 12...  
- Step 13 How to Install Mainsail & Flash Klipper via USB DFU Mode! -    • How to Build a Voron 2.4R2! – Step 13...  
- Step 14 Electric Wiring Step by Step! -    • How to Build a Voron 2.4R2! – Step 14...  
- Step 15 Klipper Setup, Probe as Virtual Z Endstop, Extruder Test! -    • How to Build a Voron 2.4R2! – Step 15...  
- Step 16 First Print with Voron 2.4, Voron Test Cube! -    • How to Build a Voron 2.4R2! - Step 16...