Thanks to PCBWay for sponsoring this video. Check out https://www.pcbway.com/ for custom printed circuit boards, electronics, and rapid prototyping services (Use my referral link to get $5 of New User Free Credit) https://www.pcbway.com/setinvite.aspx... !

Get the .stl model file to 3D print your own here (use at your own risk, of course): https://www.rcwithadam.com/flight-con...

This 3D printable adapter plate allows you to mount a 25x25mm (actually 25.5x25.5mm hole spacing) All-In-One flight controller board onto a FPV quadcopter frame that is designed for 20x20mm or 30x30mm (actually 30.5x30.5mm).

The version without the pegs works well to adapt from 20x20mm and 30x30mm easily mount.

More details in this video    • 3D Printed AIO Flight Controller Boar...  

You can watch this video without Youtube ads on my website: https://www.rcwithadam.com/videoarchive

00:00 Problem (why?)
1:25 Solution (3 options)
2:26 Why 3 different designs?
5:23 Example Demo (flat one)
7:32 How to order from PCBWay.com
-------------
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/

Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON:   / rcwithadam  
Thanks!

-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #fpvdrone #DJI