Stronger 3D Printed Parts with Electroplating
Breaking Taps Breaking Taps
395K subscribers
101,265 views
0

 Published On Feb 21, 2021

CONSIDER SUBSCRIBING 🥰
☕Buy me a coffee? https://www.buymeacoffee.com/Breaking...
🔬Or Patreon if that's your jam:   / breakingtaps  
📢Twitter:   / breakingtaps  
💻Discord:   / discord  

Double the ultimate tensile strength of resin prints with electroplating. Vastly improve the stiffness as well!

In this video we electroplate SLA samples with Acid Copper and Bright Nickel, then test their tensile and ultimate strength using a universal testing machine. Stress measurements are done with a load cell and arduino, strain measuresments are done using Digital Image Correlation software DICe. Ultimate strength just about doubles, and stiffness improves dramatically for nickel coating.

PLA prints failed due to adhesion issues, so that will have to tested again in the future.

NOTE! Nickel allergies are common, and can develop at any time, so be careful if you play around with nickel plating and handle the prints afterwards. More info: https://en.wikipedia.org/wiki/Nickel_...

DICe software: https://github.com/dicengine/dice

0:00 Introduction
1:30 Testing setup
3:12 PLA test example and analysis
4:32 Digital Image Correlation software and Visualization
5:53 Stress-Strain post processing
6:53 SLA results
9:02 PLA results
10:24 Electroplating downsides and discussion
14:26 I am weak

Related papers:

Saleh, Naguib, et al. "Effects of electroplating on the mechanical properties of stereolithography and laser sintered parts." Rapid prototyping journal (2004).

Zhou, Z., et al. "Rapid fabrication of metal-coated composite stereolithography parts." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221.9 (2007): 1431-1440.

Kumar, TV Naveen, et al. "Effects of electroplating on the mechanical properties of FDM-PLA parts." i-Manager's Journal on Future Engineering and Technology 10.3 (2015): 29.

Olivera, Sharon, et al. "Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a review." Journal of materials science 51.8 (2016): 3657-3674.

Kannan, S., and D. Senthilkumaran. "Assessment of mechanical properties of Ni-coated ABS plastics using FDM process." International Journal of Mechanical & Mechatronics Engineering 14.3 (2014): 30-35.

show more

Share/Embed