The car: LEXUS 2015 ES200
360 degree camera supplier: Guangzhou carsanbo technology limited
Installation spend time:About 3 hours
Installation cost in China :99USD
The screen use: OEM factory radio screen
Interface for LEXUS :Yes,Sample car using CVBS channel .New version support VGA channel
Tools need prepare:
1. Plastic skid tools, wrenches, scissors, etc
2. Automobile electric pen, electrical glue
3.1 meter long hard wire, a bottle of butter spray

00:08:Remove the left door trim panel and mirror
01:08:Remove the right door trim panel and mirror
01:24:Remove the rearview camera
02:02:Remove the front camera
02:40:Disassemble the car mirror
04:24:Drilling hole at mirror
05:50:The wire how to through small hole
06:37:Install the mirror back
08:23:How to find trigger wire(The turning light should turn on)
10:16:How to through rear camera wire to front site
10:51:Install front camera
11:20:How to through front camera wire to front site
12:53:Connect the host and interface
13:36:Install the door trim panel back
14:06:Install the side mirror glass
15:56:About calibration tips

We have 3 version chips ,blow is the link from our store .

CR2053 Chips 1080P
https://www.aliexpress.com/item/10050...

SONY225 chips 720P
https://www.aliexpress.com/item/10050...

SONY307 chips 1080P
https://www.aliexpress.com/item/10050...

and SONY225 chips for VAN design camera

https://www.aliexpress.com/item/10050...

We also have 360 system for bus .the link as below
https://www.aliexpress.com/item/10050...