I'm showing you how to advance in electroplating/electroforming 3D Prints with different matals. Using the positiv photoresist masking method. I used a PLA Print of a Mandalorian Beskar Steel Ingot Model. This is about #DIY #Plating #3dprints #starwars #mandalorian

Chapters
00:00 Introduction
00:25 Creating the 3D Print
01:42 Bath Electroplating with copper + Brush plating Palladium
02:43 Apply the Positive Photoresist
03:26 Sodium Hydroxide Devoloper Liquid
03:48 Expose 3D print to UV Light
04:38 Electroplate Pattern
05:30 Conclusion

For the Conductivity I used
* Tiffoo Conductive Copper Paint
! Make sure that it can be used with your copper electrolyte.

For the galvanic bath:
* a container
* copper electrolyte (sour)
* one or two copper anodes
* banana plug & alligator clips

For the galvanic pen plating:
* Palladium Electrolyte
* Chrome Electrolyte
* Graphite Anode

You may need:
* Degreaser
* Distilled water

Have fun. Try it. 🧡

Have a look to my other Videos
######################
Electroplating 3D Prints - Super Smooth
   • Electroplating 3D Prints - Super Smooth  

DIY Electroplating 3D Prints ... (the shiny way) 🧪
   • How to Electroplate 3D Prints … (the ...  

Metal Plating a Monkey Island Verb Coin
   • Video