#Audittmk1 #replacingshocks #Audishocks #Auditt8n
In this video I am going to undertake the removal and replacing of the rear shock absorbers on my 2004 Audi TT 3.2 V6. I hve never tried this before so here is a beginner's guide on how to do it.

It includes information on the hints and tips I was not aware of before starting the job and some of the pitfalls along the way.

If is relatively straight forward but best to do the prep work in advance.

You will need the following:
PARTS
(x2)Monroe G1236 Shock Absorbers
(x2) N90781301 Bolt (M10x65mm) For top of Shock
(x2)N10428102 Bolt (M14x90mm) For Bottom of Shock

** If you are replacing the shocks on the rear of the Audi TT Mk1 3.2 V6, it is recommended that you use the original Monroe OEM part direct from Audi. This is 8N0 512 011BD. The G1236 will fit but could result in bottoming out if you have lowered the car ***

TOOLS


Where did I get my parts:
AVS - Bolts (£32)
https://www.vwspares.co.uk/Audi_TT_8N...

Ebay - Shocks_Direct.1313 - Monroe G1236 Shock Absorbers (£100)
Helpful people who knew what I was looking for!

Their Ebay Shop: https://www.ebay.co.uk/sch/i.html?_ss...


Please do leave me your trhoughts and feeback in the comments or if you have any questions.

Thanks for watching!