Let's do some of my favorite FPV flying - in the tree canopy. I'm testing the RadioMaster Pocket transmitter with AxisFlying C20 FPV drone (2" Avan Blur props, 930mAh 3S LiPo) using DJI O3 Air unit set to 4K 120fps (no ND filter), stabilized with Gyroflow, image color adjusted in Davinci Resolve. I'm aslo experimenting with a different method for arming/disarming to hopefully increase safety both in flight and on the ground (we'll need more testing to see how that works out).


🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/

Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON:   / rcwithadam  
Thanks!

-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam