Support the channel and get yourself some sick Z32 merchandise! Designed by a Z32 enthusiast, for Z32 enthusiast!
https://billybuilds.com/

Taking another page out of the book from another platform, this drivetrain setup is quite common in other vehicle platforms making 1000+ HP, and has been proven to hold a LOT of power while still driving like a factory clutch.
This is literally been my dream drivetrain setup for close to 5 years now, and it's very surreal that I'm installing it now.. It's been a long time coming.
If you're at all interested in going t56 or are even considering other options besides the factory Z32 5 speed. I would Highly suggest looking beyond the "CD00" 6 speed and going straight to this, if you're needing to swap to beefier transmission or just want something that's easier to work with and parts are readily available this is it!
In this video I go into the details of installing this McLeod twin disc clutch as well as setting the clearance for the Tilton hydraulic release bearing On a VG30-t56. Which is really no different than you would set it up on any other vehicle.

This setup I have here is the Tremec T56 Magnum XL from Bowler Transmission which is included in the Merlin Machining T56 full swap
https://merlinmachining.com/products/...
the McLeod RXT1200 which was made with the help of Lisa Kubos at McLeod
https://www.mcleodracing.com/rxt-1200...

https://amzn.to/3SlbIHa -Tilton Hydraulic release bearing
https://amzn.to/48mBfFl - needed to go from the - 4an Tilton fitting to -3 on the chasebays hose.
https://amzn.to/3RKFxPM - 4 pin deutsch connectors for the wiring!
https://amzn.to/3H7eetX - deutsch crimper!

This Mcleod RXT1200 is Brand new for the VG30 - t56 setups!
After seeing and hearing about these clutches for years from A few Local friends that use this clutch on their high horsepower Coyote and 2JZ cars... I knew it was a must-have with a t56 swap!

Stay tuned for the rest of this Transmission Swap for the Rest of the parts list going into this !!

Wanna support the channel and get some stuff for your own build that i enjoy using? Below are some affiliate links to check out!

https://amzn.to/3XfvOTI Boost control solenoids:
Efan setup: https://amzn.to/3pfewtt -Spal 30102049 16" Curved Blade Performance Fan , Black
fan relay harness: https://amzn.to/3p4rytT
https://amzn.to/3tCRHCf -1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit
https://amzn.to/3H4HiCi - Elbow and Straight Combination 1/4 Inch Tube OD x 1/4 Inch NPT Thread
https://amzn.to/3S7DTsW - Nylon push-connect hose
https://amzn.to/3H4HzVQ - use these to adapt to a barb fitting for regular silicone hose
https://amzn.to/3SlbIHa -Tilton Hydraulic release bearing
https://amzn.to/48mBfFl - needed to go from the - 4an Tilton fitting to -3 on the chasebays hose.
https://amzn.to/3RKFxPM - deutsch connectors for the wiring!
https://amzn.to/3H7eetX - deutsch crimper!
https://amzn.to/3OQmnrT - Lisle 81780 Carbide Scraper Set -
https://amzn.to/3OQmnrT -Permatex copper spray
Quinn 1/2" digital torque wrench -https://amzn.to/3NdbKOG - Mine is snapon, but if i had to get another this would be it.