Buy Now!
New Valve Cover Gasket Set from 1AAuto.com http://1aau.to/ie/1AEGS00177

This video shows you how to install a new valve cover gasket from TRQ on your 2007-2011 Toyota Camry (2.4L V4). Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs!

This process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obwh/1AXAA00013
• 10mm Socket http://1aau.to/obrg/1AXAA00017
• Trim Tool Set http://1aau.to/oak3/1AXXX00006
• Vise-Grips
• Pliers
• E5 Socket
• Ratchet http://1aau.to/obRa/1AXAA00016
• Torque Wrench http://1aau.to/oaUD/1AXAA00044
• Cloth Rags http://1aau.to/oHM/1AXSS00035
• Gloves http://1aau.to/oaAq/1AXSS00048
• RTV
• Safety Glasses
• Razor Blade / Gasket Scraper

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.