The (almost) final overview drawing and lathe work on the wheel hub …
↓↓↓ Complete description, time index and links below ↓↓↓

This project was in hibernation for nine month. But now I’ve (almost) finished the drawings, acquired (almost) all necessary tools and bought (almost) all necessary stock materials. So let’s make some chips!

We start out by having a look at the overview drawing and the changes I made since the last video (link below). Then we have a look at the detailed drawing of the wheel hub. Finally we do all the required lathe work on the wheel hub.

00:00 Intro – last video April 2023, today first chips
00:33 Overview drawing – the almost finished version
04:15 Hub drawing – at least that one is final
06:19 Dialing (1) – in the 52mm round stock on the lathe
07:59 Turning (1) – one face of the round stock
09:21 Drilling (1) – a whole for the live center
09:41 Turning (2) – down to 28mm up to the flange
18:07 Turning (3) – the face down to 23mm length
19:16 Drilling (2) – the 16mm hole in six steps
25:36 Filing (1) – the edges of the face smooth
25:51 Polishing (1) – the turned surface to make it shiny
26:23 Dialing (2) – in the already machined surface
27:41Filing (2) – the edges of the flange
28:07 Turning (4) – the flange down to 7mm length
30:04 Turning (5) – the flange outside diameter
32:38 Filing (3) – the edges of the flange
33:25 Wrap-up – nice result, key slot is next, bye

Electronic Steering Wheel / Rudder Jog IP68    • Electronic Steering Wheel / Rudder Jo...  
Electronic Steering Wheel / Rudder Jog IP68 (1): Requirements    • Electronic Steering Wheel / Rudder Jo...  
Electronic Steering Wheel / Rudder Jog IP68 (2): Static & Bending Calculations (1)    • Electronic Steering Wheel / Rudder Jo...  
Electronic Steering Wheel / Rudder Jog IP68 (3): Static & Bending Calculations (2)    • Electronic Steering Wheel / Rudder Jo...  
Electronic Steering Wheel / Rudder Jog IP68 (4): Static & Bending Calculations (3)    • Electronic Steering Wheel / Rudder Jo...  
Mailbag: 2 Ton Press, Broach, Turning Tools, Drills, Aluminum and POM    • Mailbag: 2 Ton Press, Broach, Turning...  

#steeringwheel #steeringcontrol #rudder #jog #electronic #ip68 #robertssmorgasbord