In this video we will take a look at eSUN's matte PLA filament and I will take you through the print settings required for this very matte looking material.

I found that this filament does require more attention and care than printing with regular PLA materials so you're going to want to give my print settings a try to get started. This way you will waste less filament trying to find the base settings if you decide to purchase this material.

With this material you can certainly achieve the look of other low sheen materials like carbon fiber nylon if you use their matte black color. eSun sent me almond yellow and matte white to test and you can see how low sheen they are when compared to regular PLA.

You can find available colors and material properties here:

► https://www.esun3d.net/products/511.html

The models printed in this video were printed on three different printers to ensure that any issues I experienced were, in fact, issues with the filament rather than machine issues.

Those 3 printers were:

► Creality CR-10 Smart (no mods)
► Printer:
►    • Creality CR-10 Smart Long Term Review...  

► ANET ET5X (microswiss direct drive extruder + all metal hot end
► Printer:
►    • ANET ET5X Setup, Settings, and Review...  
► Mods:
►    • How To Install Micro Swiss Direct Dri...  

► ANET A8 PLUS (no mods)
► Printer:
►    • ANET A8 Plus Assembly Guide, Setup, R...  

Before starting with your printing, be sure to measure the diameter of the filament at several points to see if you need to bump up your extrusion multiplier like I did.

Fun fact... this material also smells like movie theatre buttery pop corn when you print with it. Some PLA materials have a sweet smell to them (during printing), this one actually smells like buttery pop corn and in the almond yellow color it reminds me of scented markers as a child.

Thank you to eSUN for providing me with this filament for the making of this video!

Hope this video helps you guys and if you have any questions, feel free to ask them in the comments section below!

Thanks for watching!

#DIY #3DPRINTING #FILAMENT

****************************************************************

If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:

► https://www.paypal.com/donate/?hosted... ☕

By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!

Follow me on Instagram!

►   / embracemaking   📷

If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...

DIY and MAKER:

► The Hacksmith
   / @thehacksmith  

► Adam Savage Tested
   / @tested  

► Thomas Sanladerer
   / thomassanladerer  

Car Content:

► Mighty Car Mods
   / @mightycarmods  

► Drivetribe
   / channel