In this video I am testing Eryone filaments from mechanical strength aspect. PLA vs PLA+ vs PETG, which is best for 3D printing different mechanical parts. This is a comparison test, but I will try to keep these tests as some kind of standard, so they are comparable with each other.

Eryone 14% coupon code (mytechfun):
https://eryone3d.com/?ref=mytechfun

Results can be seen in video or on my website:
https://www.mytechfun.com/video/97
STL files for used test specimens can be downloaded from above link.

Temperature tower prepared from parts:
https://www.thingiverse.com/thing:272...

Support my work:
https://www.buymeacoffee.com/mytechfun
  / mytechfun  
https://www.mytechfun.com/donation

Contents:
0:00 Introduction
0:57 About Eryone PLA
2:30 About Eryone PLA+
2:50 About Eryone PETG
3:58 3D printing PLA test specimens
4:41 3D printing PLA+
6:04 3D printing PETG
7:32 Tensile test
8:14 Layer adhesion test
8:54 Shear test
9:36 Bending test
10:17 Impact test
11:35 Twist test
14:57 Temperature test
15:49 Conclusions

PLA printed at 215°C, PLA+ at 225°C, PETG 235°C on Prusa MK3s. All test specimens are printed with max number of walls (except temperature test, 2 walls, 20% infill).

#eryone #3dprinting #plaplus #plavspetg