Published On Mar 12, 2023
https://www.v1e.com/
Instructions on fixing any errors are here, https://docs.v1e.com/electronics/dual..., using M666
This is the GCode that was running in the video, you can edit it to fit your machine. The further apart the points, the more accurate your test will be.
G28
G00 X30 Y30 F1800
M0 Attach probe
G38.2 Z0
G92 Z0.5
G1 Z5 F900
M0 Remove probe
G01 X640 F17000
G01 Z-0.8 F900
G01 Z5 F900
G01 Y1240 F17000
G01 Z-0.8 F900
G01 Z5 F900
G01 X30 F17000
G01 Z-0.8 F900
G01 Z5 F900
G01 Y30 F17000
G01 Z-0.8 F900
G01 Z5 F900
G01 X320 Y625 F17000
G28 Z
M0
V Bit - https://www.v1e.com/collections/sharp...
Touch plate - https://www.v1e.com/collections/sharp...