Coating a 3D printed shell with red glass forged carbon fiber fabric, no vacuum bag required.

0:10 Making a template by covering the item in masking tape.
0:23 Covering the shell bottom to keep overlapping carbon fiber from sticking.
0:38 Molding clay on release plastic into the center grooves so the carbon fiber fabric can be compressed into the details during cure.
0:58 Cutting out pattern pieces from glass forged fabric. Inner edges are torn instead of cut so the overlapping joints will blend seamlessly into the pattern.
1:25 Adding epoxy resin to backs of pieces and positioning on part using silicone release coated nylon peel ply.
2:41 Laying small pieces of non-porous peel ply over the fabric to keep it resin rich.
3:04 Placing the clay block into the center to press fabric into fine details.
3:10 Wrapping shrink tape around part and heating to compress.
4:29 Removing shrink tape, clay and peel ply from fully cured parts.
5:28 Sanding overhanging edges and front surface to smooth part.
6:41 Adding coats of epoxy resin to get a good cosmetic finish.
8:27 Red glass forged carbon fiber skinned nautilus shell with wooden display stand.

·······················································
▶▶▶ Supplies◀◀◀
Nautilus 3D Model: https://www.thingiverse.com/thing:955219
Glass Forged Carbon Fiber Fabric: https://ulticarbon.com/product-catego...
https://www.etsy.com/shop/ULTICARBON
Epoxy Resin: https://compositeenvisions.com/deep-s...
Proto-Pasta Matte Fiber HTPLA Filament: https://amzn.to/3hkVKca
Rotary Cutting Set: https://amzn.to/2uau81m
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
CA: https://amzn.to/2Z4yHaE
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
CA: https://amzn.to/2KngMYD

Recorded on Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
CA: https://amzn.to/2WlHc4d
Lighting Kit: https://amzn.to/2DfaMiG

The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.

#ForgedCarbonFiber #ULTICARBON #3DPrinting #GlassForged #CarbonFibre #ForgedCarbonFibre #forgedcarbonfiberskinning #forgedcarbon #seashell