Hello, this is Muyoung Workshop.🙏
Among the piping parts, I made a hammer using an undergarment.
I bought it at a hardware store, but I don't know how many.
The material is Hsinchu, the outer diameter is about 42mm, and the inner diameter is about 30mm.
I changed four places with a diamond file on one side of the undergarment so that the wood was well threaded.
The threaded indentation on the tree was processed 2 mm thicker than the inner diameter of the inner tee.
If it is thick, it is difficult to thread, and if it is thin, it can be easily released. When screwing off, apply oil or candle.
It seems to help a lot.
And while assembling to increase weight, the soktian was filled with 3mm steel beads.
The wood type is a purple heart for the hammer head, and the handle is a combination of oak and walnut.
The wood material used for the hammer head is unlikely to be suitable, but it is made of wood.
The etching used ferric chloride stock solution, soaked for about an hour.
Washing was done by dissolving baking soda in water.
I would appreciate it if you enjoyed watching it.
Subscribe and Like Thank you 😀

#Mallet #Hammer #Tools