Find the parts used in the video on CarParts.com just there https://carparts.solutions/CAMRY

⚙️ NEEDED CARPARTS AND PRODUCTS
- CV Axle : https://carparts.solutions/CVAxleD_CAMRY and https://carparts.solutions/CVAxleP_CAMRY

- Penetrating oil

💪 TIGHTENING TORQUES
- Strut lower bolts : 155 Ft-lbs

- Brake caliper mount bolts : 79 Ft-lbs

- Wheel hub nut : 217 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Toyota Camry :
- https://carparts.solutions/ToolBox

List of the tools we used to replace the driveshaft on a Toyota Camry :
- Breaker bar
- 30mm socket
- Hydraulic jack : https://carparts.solutions/FloorJack
- Jack stands : https://carparts.solutions/JackStands
- Wheel lug wrench
- Ratchet
- 17mm socket
- Cable or Hook
- Extender
- 10mm socket
- Wire brush
- 22mm socket
- 22mm wrench
- Pin punch
- Hammer
- Large flat head screwdriver
- Crowbar
- Torque wrench :
20 to 250 Ft-lbs https://carparts.solutions/TorqueWren...
100 to 600 Ft-lbs https://carparts.solutions/TorqueWren...

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2011 Toyota Camry
- 2012 Toyota Camry
- 2013 Toyota Camry
- 2014 Toyota Camry
- 2015 Toyota Camry
- 2016 Toyota Camry
- 2017 Toyota Camry

📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Toyota Camry safely :    • How to jack your Toyota Camry safely ...  

⚠️ CARPARTS.COM'S INFOS
- If your vehicle is equipped with aluminum rims, you will need to remove the wheel first before you can remove the central rim cover.

- Finish tightening the hub nut once the vehicle is on the ground, using a torque wrench.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:10 Loosen the wheel hub
0:33 How to pull up your Camry
1:16 Remove the brake system
2:13 Remove the ABS Sensor
2:26 Remove the strut foot
3:32 Remove the CV Axle from the steering knuckle
3:44 Remove the CV Axle from the gearbox
3:58 Put the CV axle back
4:45 Put the strut foot back back + tightening torques
5:11 Put the ABS sensor back
5:25 Put the brake system back + tightening torques
6:02 Put your Camry back on the ground
6:56 Tighten the hub nut + tightening torques