Step-by-step build of the Cinebot30 after crashing at an abandoned mall. This was the second time building this kit, so I felt a video might help someone putting it together from scratch.

Watch for the crash down the elevator shaft at the beginning and watch it's maiden voyage at the very end.

Watch the Bando Mall video here:
   • Bando Mall Cinematic Fly Through - Ci...  


Parts:
GEPRC GEP-CT30 03 Frame
GEPRC Speedx2 1804 2450kv Motors
GEPRC GEP-F722-45A AIO V2
GEPRC 1100mAh 60C/110C LiHV Battery 6S W/XT60 (Consistent 7min flights with GoPro)
GEPRC Full-size GoPro Base Mount: https://geprc.com/product/geprc-gep-c...
HQProp T76MMX3 Propellers
Radio Master Boxer
Radio Master EP-1 Receiver
DJI 03 Air unit
DJI Goggles 2
Full Size GoPro Hero 8

(just gee whiz, not affiliate links)
Receiver MX Connectors: https://a.co/d/iBmFsmR
Motor wire tape -15mm acetate cloth: https://a.co/d/bjJOeFa
M2 Washers (For 03 Camera): https://a.co/d/gcebgxj
M2x12 Screw (For Antenna Mount): https://a.co/d/gcebgxj
Clear Shrink Tubing (Receiver): https://a.co/d/b2Dk1q9



TIME STAMPS
00:00 Intro/Crash
00:44 Tear Down
02:24 Unboxing
04:50 Build Start - Prep Camera Mount
07:23 Top Plate Prep
08:10 Main Frame Prep
08:42 Camera Housing Prep
10:36 Antenna Holder
13:05 Top Plate
13:50 Battery Strap
15:14 Flight Controller
16:29 Motors
19:58 Motor Wire Tubes/Tape
22:27 Camera Housing
23:07 Wiring Tips
26:11 LED Tips
28:11 Bottom Plate/VTX
28:55 Main Frame/Bottom Plate
32:18 Top Plate/Main Frame
35:45 Receiver Antenna Mount
36:41 Flight Camera
38:25 Secure Power Wire
38:39 Battery Pad
38:59 GoPro Plate
39:37 Props
41:09 Finished
41:21 Test Flight

Music
Sensible - Hojo
Drift - Boomjag