The New Toms Techniques Shop

Tom's Tips & Tricks #3 - Plunge Milling

Tom's Tips and Tricks #2 - Power Feed for the Compound Rest

Tom's Tips & Tricks #1 - Quick Part Alignment on the Lathe

Clamp Knurling Tool, Case Hardening the Steel Parts

Making Scope Rings for the Browning A Bolt 3 - Part Four

Making Scope Rings for the Browning A Bolt 3 - Part Three

Making Scope Rings for the Browning A Bolt 3 - Part Two

Making Scope Rings for the Browning A Bolt 3 - Part One

Climb Milling vs. Conventional Milling

Red Hardness

Clamp Knurling Tool, Mounting Bracket and Back Plate, Part Two

Clamp Knurling Tool, Mounting Bracket, Part One

Clamp Knurling Tool Body, Drilling, Tapping and Counter-Boring the Holes

Clamp Knurling Tool, Body, Four Ways to Machine the Outer Contour

Clamp Knurling Tool Body, Milling the Slot

Clamp Knurling Tool, Body, Squaring the Stock and Boring the Center Hole

Clamp Knurling Tool Body, Introduction

Clamp Knurling Tool, Knurl Holder Part 1, Squaring the Stock

Clamp Knurling Tool, Knurl Holder Part 2, Milling the Slot and Chamfer and Reaming the Pin Hole

Clamp Knurling Tool, Introduction

Welcome Back!

Dial Carriage Stop

Cutter and Backlash Compensation on the Milling Machine

Use of the Fly Cutter on the Milling Machine

Micrometer Carriage Stop, Final Assembly and Demonstration

Carriage Stop Clamp Bolts, Machining the Head and Heat Treating

Carriage Stop Clamp Bolts, Turning the Shank and Chasing the Thread

Carriage Stop Thimble Part Four, Stamping the Numbers

Carriage Stop Thimble Part Three, Using the Dividing Head to Cut the Divisions