In this tutorial we will learn how to include the Soldermask and the Silkscreen to a PCB using a low cost CNC machine and a medium-power laser module.

00:00 Introduction
02:39 G-Code Programs (FlatCAM)
09:32 Preparation and application of the mask
11:45 Laser alignment
15:06 Silkscreen
16:59 Soldermask
19:11 Drill and cutout
19:52 Finishing and final results

The resources used in the video and some frequently asked questions can be found in the following article:

http://gomezgimenez.com/electronica/2...

FlatCAM version: 8.994
https://bitbucket.org/jpcgt/flatcam/d...

Candle version: 1.1.7
https://github.com/Denvi/Candle/relea...

Materials used in the video:
- Flexible spatulas: https://www.amazon.es/dp/B0832XB5PH
- Cleaning brushes: https://www.amazon.es/dp/B08XXS3NPN
- PCB drills: https://www.amazon.es/dp/B073P4PQLZ
- Polypropylene sheets: https://www.amazon.es/dp/B006F3714O
- Copper PCB: https://www.amazon.es/dp/B07RBK9WW6

- UV mask: https://es.aliexpress.com/item/400015...
- CNC 1610: https://es.aliexpress.com/item/100500...
- 20W laser: https://es.aliexpress.com/item/400113...
- 0.1mm x 20º PCB drill: https://es.aliexpress.com/item/400096...


Music by Ketsa