Published On Nov 4, 2017
Hey! Firstly I have to say that I've ONLY used handle from this file
https://www.thingiverse.com/thing:131...
I wasn't sure if I had enough filament to print the head, so I used sliced remix of this file made by TheRedBeard
https://www.thingiverse.com/thing:225...
If you're sure you have enough filament print head from ChaosCoreTech file, because glueing 8 parts of the head from the remix was really frustrating and I had to put a lot of work to hide the lines from where it was glued. There was a lot of sanding & priming involved. I sprayed it with metalic silver and then used watered black acrylic paint to make it look more "metal-ish". I used brown acrylic paint for the handle.
Printer:
Creality3D CR - 10
Filament:
Fiberlogy Easy PLA at 210 Degree Celsius
Supports:
No, but handle could really use them. It would save a lot of sanding after. (Overhangs from "silver parts" on the handle are a pain to print without supports)
Resolution:
0.2 for handle 0.3 for head
Infill:
18% for handle, 7% for head
https://creativecommons.org/licenses/...
Like Apollo by jimmysquare / jimmysquare
Life Is by Cosimo Fogg (201) / cosimo-fogg
Kronicle - Friday - • Video
Soundcloud - / the-chemist-10