GO WATCH PART 2 HERE:    • Installing Twin Screamer Pipes On My ...  

Brand New to the Z32 300ZX Market are these beautiful Polar Engineering Turbo Manifolds. To go with these turbos it is a requirement to use one normal and one reverse rotation turbo along with External Wastegates. These manifolds were designed with the 45mm Turbosmart wastegates in mind, which is exactly what i'm installing today! This is set # 003 and to my knowledge the first set to be installed on a motor!
I actually purchased these Pulsar G25-660 Turbos a little over 2 years ago with full intention of going with a externally wastegated setup, before these manifolds were even announced that they were going into production. It just so happened to all come to be at exactly the right time!
This is something the Z32 chassis has been missing for quite some time now as so many other platforms have been utilizing a similar setup for nearly a decade. These manifolds not only look the part, but also open the door to so many more options for turbo and wastegate combinations. This turbo setup in this video I am anticipating to provide much quicker spool than my old gt2871 but also make nearly 400hp more in a smaller package. This platform has always been limited to the typical cookie-cutter, off the shelf turbo kits offered by certain companies. Although it has simply "worked", It has also been the biggest hindrance and limiting factor.
Of course during this install process I will provide my insights and suggestions as I go to make it easier for everyone.

You can place your order for the turbo manifolds here
https://www.polarengineering.co/produ...

As for turbo ordering, You can email Polar Engineering for Pulsar or Garrett options.
OR
I bought my pulsar turbos through Moslow Motorsports on Facebook.   / moslowmotorsports  

Believe me when I say You WILL NOT find a better deal on these turbos then by ordering from one of the two options mentioned above!

Pulsar has changed the name of these turbos to their "5449"
https://www.pulsarturbo.com/product/p...
https://www.pulsarturbo.com/product/p...

Wanna support the channel and get some stuff for your own build that i enjoy using? Below are some affiliate links to check out!

https://amzn.to/3XfvOTI Boost control solenoids:
Efan setup: https://amzn.to/3pfewtt -Spal 30102049 16" Curved Blade Performance Fan , Black
fan relay harness: https://amzn.to/3p4rytT
https://amzn.to/3tCRHCf -1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit
https://amzn.to/3H4HiCi - Elbow and Straight Combination 1/4 Inch Tube OD x 1/4 Inch NPT Thread
https://amzn.to/3S7DTsW - Nylon push-connect hose
https://amzn.to/3H4HzVQ - use these to adapt to a barb fitting for regular silicone hose
https://amzn.to/3SlbIHa -Tilton Hydraulic release bearing
https://amzn.to/48mBfFl - needed to go from the - 4an Tilton fitting to -3 on the chasebays hose.
https://amzn.to/3RKFxPM - deutsch connectors for the wiring!
https://amzn.to/3H7eetX - deutsch crimper!
https://amzn.to/3OQmnrT - Lisle 81780 Carbide Scraper Set -
https://amzn.to/3OQmnrT -Permatex copper spray
Quinn 1/2" digital torque wrench -https://amzn.to/3NdbKOG - Mine is snapon, but if i had to get another this would be it.


Music:
Track: MAD SNAX, Poylow, New Beat Order - Lonely Hour [NCS Release]Music provided by NoCopyrightSounds.Watch: http://ncs.lnk.to/lonelyhourAT/youtub... Download / Stream: http://ncs.io/lonelyhour