In this video I will show you how to remove your filament on the Creality K1 to prevent extruder jams which seems to be common. I believe the root cause is the small amount of filament that gets pinched off by the extruder gears if the extruder is not unlocked before pulling the filament out.

If your extruder does get clogged or jammed, I will show you how to disassemble your extruder and clear the jam. This happened to me before I started unlocking my extruder before pulling the filament out and has not happened since.

I will also show you how to install a hardened steel nozzle on the Creality K1 so that you can print abrasive filaments like carbon fiber nylon or carbon fiber PETG.

You can find a hardened steel nozzle on my website here:
► https://embracemaking.com/products/cr...

Note that this may not be the only source of extruder jams as there have been reports of filament jams possibly caused by printing PLA with the lid and door closed. The PLA may soften in the extruder before the hotend and get jammed, however I do believe the issue that I address in this video is more common.

Also note that an extruder jam is different than a hot end jam and that is a completely different set of problems if you are experiencing hot end clogging.

I also have several upgrades that I have made available for the K1 as seen in the video. See the links below:

Creality K1 double sided (smooth / texture) PEI flex plate:
► https://embracemaking.com/products/cr...

Super Deluxe Spool Holder
► https://embracemaking.com/products/su...

Spool Stand X:
► https://embracemaking.com/products/sp...

If you have any questions, comments, or suggestions, I would love to hear from you in the comments section below.

A few other cool tools and things for 3D printer enthusiasts (As an Amazon associate I may earn a small commission at NO extra cost to you):

Polymaker PolyTerra PLA (One of my favorite filaments):
► https://amzn.to/3sdhK1x

eSUN PLA+ (Another one of my favorite filaments):
► https://amzn.to/3QA4tuq

Electric Screwdriver:
► https://amzn.to/3JRbbZe

Velcro Tie Wrap Rolls
► https://amzn.to/42jr3dX

Thank you for watching!

#creality #k1 #crealityk1

0:00 Intro
0:50 How to Prevent Jams
2:23 How to Unclog Extruder
6:07 How to Install Hardened Nozzle
9:28 Back to Printing
9:59 Outro

****************************************************************

If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:

► https://www.paypal.com/donate/?hosted...

By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!

Follow me on Instagram!

►   / embracemaking